- Home
- 1/2 inch HENRY TAYLOR Curved Carving Gouge - No.19 sweep
Add To Your Wishlist1/2 inch HENRY TAYLOR Curved Carving Gouge - No.19 sweep
Add To Your Wishlist1/2 inch HENRY TAYLOR Curved Carving Gouge - No.19 sweep
£0.00
£22.00
In stock: 1
Sorry! We're out of stock
SKU: 2884aa
Earn
0 reward points
A little used 1/2 inch or 12mm No.19 sweep curved or long bent carving gouge by HENRY TAYLOR of Sheffield.
Marked 'H TAYLOR SHEFFIELD 19 MADE IN ENGLAND' with the Acorn trade mark on the blade.
Much of the original straw finish remains to the inside of the blade.
Very good beech wood handle with line decoration and steel ferrule.
No previous owner's stamps.
97/8 inches (250mm) overall length.
You may also like...
Narrow Fishtail Carving Gouge - 1/16 inch 2mm
£19.00
A good 1/16 inch or 2mm fishtail carving gouge.No obvious maker's mark but clearly professionally made.Not marked with a sweep number however this gou...
View details
Vintage 3/8 inch ASHLEY ILES Sheffield Curved Carving Gouge
£23.00
A good 3/8 inch curved or bent carving gouge by ASHLEY ILES of Sheffield.Marked 'ASHLEY ILES LTD SHEFFIELD ENG' on the top of the blade.Not marked wit...
View details
Large ASHLEY ILES No 11 Deep Carving Gouge - 3/4 inch
£25.00
A good 3/4 inch or 20mm large deep carving gouge by ASHLEY ILES.Usually marked 'ASHLEY ILES LTD MADE IN ENGLAND' on the top of the blade however this ...
View details
3/8 inch ASHLEY ILES No 9 Straight Carving Gouge - Unused ?
£21.00
A very little used, possibly unused, 3/8 inch or 10mm No.9 deep straight carving gouge by ASHLEY ILES.Very faintly marked 'ASHLEY ILES LTD MADE IN ENG...
View details
Curved Firmer Gouge by RODGERS BROTHERS - 3/8 inch
£16.00
A 3/8 inch or 10mm curved firmer gouge by RODGERS BROTHERS of Sheffield.RODGERS BROTHERS was a short lived firm of Sheffield edge tool makers and the ...
View details
Early ADDIS Senior Curved V Carving Gouge
£35.00
A scarce early 19th century ADDIS curved vee carving gouge.Marked 'ADDIS SNR' to the underside of the blade, believed to be the mark of Joseph James A...
View details
SJ ADDIS No.21 Carving Spoon Chisel - 1/4 inch
£18.00
A good 1/4 inch or 6mm SJ ADDIS No.21 sweep spoon carving chisel.Marked 'SJ ADDIS CAST STEEL' with the Square and Compass trade mark on one side of th...
View details
MARPLES Carving Mallet
£32.00
A good beechwood carvers mallet by MARPLES of Sheffield.Marked 'MARPLES' ash wood handle.The beechwood head is approximately 35/8 inches (93mm) in dia...
View details