- Home
- Cabinetmakers Float *SOLD*
Add To Your WishlistCabinetmakers Float *SOLD*
Add To Your WishlistCabinetmakers Float *SOLD*
£0.00
£0.00
In stock: 0
Sorry! We're out of stock
SKU: 2867t3
Earn
0 reward points
An antique cabinetmakers cranked or dog leg float.
Also sometimes referred to as a gunstokers or planemakers float.
19 teeth approximately 3/16 inch (5mm) wide over a 13/16" (30mm) long run.
A few minor surface pitting and staining spots, please see images.
Very good hardwood handle with brass ferrule.
No previous owner's stamps.
73/4 inches (197mm) overall length.
May require sharpening before use.
You may also like...
MARPLES 5/8 inch Paring Gouge
£21.00
A good 5/8 inch or 16mm in-cannel paring gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS SHEFFIELD' with the Shamrock trade mark to the top...
View details
SORBY 1 inch Paring Gouge - Unused
£22.00
A probably unused 1 inch or 25mm wide in-cannel paring gouge by SORBY of Sheffield.Marked 'I SORBY SHEFFIELD' with the Mr Punch trade mark on the blad...
View details
5/8 inch ASHLEY ILES No 3 Straight Carving Gouge - Unused ? *SOLD*
£0.00
A very little used, possibly unused, 5/8 inch or 15mm No.3 shallow straight carving gouge by ASHLEY ILES.Very faintly marked 'ASHLEY ILES LTD MADE IN ...
View details
CHARLES HILL 5/16 inch Curved V Carving Gouge
£24.00
A good 5/16 inch or 8mm curved 60 degree v carving tool by CHARLES HILL of Sheffield.Marked 'C HILL SHEFFIELD' with the Cannon trade mark on the top o...
View details
MARPLES Drawbore Pins
£85.00
A very good vintage pair of tapered 1/2 inch max diameter) steel drawbore pins by MARPLES of Sheffield.Each pin is marked 'W MARPLES & SONS', a fe...
View details
1 5/16 inch CF JOHNSON Paring Gouge
£22.00
A little used 1 5/16 inch or 33mm in-cannel paring gouge by CF JOHNSON of Sheffield.Marked 'CF JOHNSON' on the blade.A few minor surface staining spot...
View details
Miniature Adjustable Spanner Wrench - Made in England
£10.00
A very small adjustable wrench or spanner.Marked 'MADE IN ENGLAND' on the handle.The end of the handle is formed as a slotted screwdriver.1/2 inch or ...
View details
HENRY TAYLOR No.21 Spoon Carving Chisel - 1/8 inch
£18.00
A very good 1/8 inch or 3mm HENRY TAYLOR No.21 sweep spoon bent carving chisel.Marked 'H TAYLOR ENGLAND 21' with the Acorn trade mark on the blade.Ver...
View details