- Home
- Chisels & Gouges
- 1 1/4 inch HEARNSHAW BROTHERS John Bull Firmer Chisel with Wilfin Patent Handle
Add To Your Wishlist1 1/4 inch HEARNSHAW BROTHERS John Bull Firmer Chisel with Wilfin Patent Handle
Add To Your Wishlist1 1/4 inch HEARNSHAW BROTHERS John Bull Firmer Chisel with Wilfin Patent Handle
£0.00
£18.00
In stock: 1
Sorry! We're out of stock
SKU: 2856l
Earn
0 reward points
A good 1 1/4 inch or 31mm John Bull brand firmer chisel by HEARNSHAW BROTHERS of Sheffield.
Marked 'HEARNSHAW BROTHERS SHEFFIELD' with the John Bull trade mark to the top of the blade.
A few surface pitting and staining spots, please see images.
Fitted with a good Wilfin Patent beech wood handle with brass ferrule the metal ring. This 'patent metal bond' was designed to prevent splitting with advertising stating that it 'makes the weakest part of all tools now the strongest'.
Faintly marked 'WILFIN PATENT' near the metal ring, please see close-up image.
The previous owner has bored a hanging hole in the handle for storage.
123/8 inches (314mm) overall length.
You may also like...
5/16 inch STORMONT Registered Mortice Chisel
£18.00
A very good and little used 5/16 inch or 8mm mortice chisel by STORMONT of Sheffield.Marked 'STORMONT SHEFFIELD' to the top of the blade.A few minor s...
View details
PFEIL Large Drawknife - 240mm - 9 1/2"
£65.00
A very good drawknife or drawing knife by PFEIL of Switzerland.Marked 'SWISS MADE' with the Arrow trade mark on the blade.Gently curved blade, please ...
View details
12 inch DMT Diamond Whet Stone
£95.00
A good 12 inch DMT diamond sharpening system by DIAMOND MACHINING TECHNOLOGY Inc USA.The stone measures 12 by 25/8 inches.12 inch diamond whet stones ...
View details
Natural Tam O Shanter Stone - Sharpening Stone - Razor Hone
£55.00
A vintage natural sharpening stone or water stone.Believed to be a Scottish Tam O Shanter stone or Scotch hone.This stone measures approximately 8 inc...
View details
Unused Group of 4 CARBORUNDUM C320 Slip Stones - 8 inch
£20.00
A group of four unused 8 inch long square carborundum slip stones.Each stone is marked 'CARBORUNDUM C320 0 VCHH' on one side.Two corners are slightly ...
View details
3/8 inch MARPLES Mortice Chisel
£23.00
A good 3/8 inch or 9mm mortice chisel by MARPLES of Sheffield.Marked 'W MARPLES & SONS SHEFFIELD' with the Shamrock trade mark to the blade.A few ...
View details
ROBERT SORBY Bevel Edge Chisel - 6mm 1/4"
£18.00
A very little used, probably unused ROBERT SORBY traditional bevel edge chisel.Described as a 500 C.A.B. handled chisel in the catalogue.Marked 'ROBER...
View details
WOODCOCK 1 1/2 inch Bevel Edge Paring Chisel
£44.00
A good 1 1/2 inch or 38mm wide bevel edge paring chisel by WOODCOCK of Sheffield.Sometimes referred to as 'long thin paring chisels'.Marked 'WOODCOCK ...
View details