- Home
- EDWARD PRESTON Ebony Spirit Level - 9 inch *SOLD*
Add To Your WishlistEDWARD PRESTON Ebony Spirit Level - 9 inch *SOLD*
Add To Your WishlistEDWARD PRESTON Ebony Spirit Level - 9 inch *SOLD*
£0.00
£0.00
In stock: 0
Sorry! We're out of stock
SKU: 3263j
Earn
0 reward points
A 9 inch (815/16" actual) brass plated ebony spirit level by Edward PRESTON of Birmingham.
Marked 'E PRESTON & SONS' with the EP trade mark and 'WARRANTED CORRECT' to the top brass plate.
The clear bubble tube is intact.
Brass top plate and tipped bottom.
Various surface knocks and scratches, please see images.
No previous owner's stamps.
815/16 inches long, 11/16" wide and a little under 7/8" in height.
You may also like...
Pair of Mushroom Planishing Anvils or Tinsmiths Forming Anvil Stakes
£49.00
A good pair of mushroom forming, raising or planishing stakes.Sometimes also referred to as a mushroom dolly.1.) 13/4 inch (44mm) diameter head, 61/8"...
View details
WHITEHOUSE 300 Raising or Planishing Hammer
£29.00
A very good WHITEHOUSE 300 planishing or raising hammer.Marked '300' to the top of the head.11/2 inch (38mm) wide convex faces.43/4 inches (120mm) bet...
View details
Brass Plated Rosewood Spirit Level
£29.00
A very nice heavy brass plated rosewood spirit level.The top brass plate has decorative viewing windows.Clear bubble and tube are intact.Brass tipped ...
View details
MARPLES No 8 Deep Carving Gouge - 1/4 inch
£19.00
A very good 1/4 inch or 6mm No.8 deep carving gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS CAST STEEL' with the Shamrock trade mark to t...
View details
Pair of Vintage Round Brass Flush Ring Pull Cabinet Handles
£15.00
A pair of 'new old stock' vintage round brass ring pull drawer or cabinet handles.Approximately 25/8 inches (67mm) in diameter, 3/4" (19mm) overall de...
View details
Mortice Gauge by CLAY
£15.00
A mortice or mortise gauge by CLAY of Sheffield.Marked 'WH CLAY 1930 SHEFFIELD' on one side of the head stock.Brass thumb slide adjuster.Good length p...
View details
MARPLES No 7 Straight Carving Gouge - 7/16 inch
£16.00
A good No.7 sweep straight carving gouge by MARPLES of Sheffield.Just over 7/16 inch or 12mm at the cutting edge.Marked 'MARPLES & SONS SHEFFIELD'...
View details
MARPLES Deep Carving Gouge or Veining Tool - 1/16 inch
£19.00
A very good 1/16 inch or 2mm deep veiner or carving gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS' to one side of the blade.Not marked wi...
View details