- Home
- KAYES Oil Can - No.17A
Add To Your WishlistKAYES Oil Can - No.17A
Add To Your WishlistKAYES Oil Can - No.17A
£0.00
£55.00
In stock: 1
Sorry! We're out of stock
SKU: 2649
Earn
0 reward points
A very tidy and scarce flip top No.17A 1/2 pint seamless oil can by KAYE'S of Leeds.
Sometimes referred to as a KAYES pie crust oil can.
Brass letter K with 'KAYE'S LEEDS' to the left side and the embossed 'K' trade mark to the top.
Stamped 'C 1/2 PT 17A' on the base.
A few minor knocks, please see images.
Approximately 113/4 inches overall length including the spout.
* Please note this can is untested.
You may also like...
Small Scotch Pattern Brace by JOHNSON
£45.00
A scarce antique 8 inch sweep Scottish or Scotch pattern iron brace by Christopher JOHNSON of Sheffield.Smaller than usual and the first we have seen ...
View details
Vintage Jewellers Anvil or Flat Bench Block
£29.00
A useful vintage jewellers steel anvil or bench block.15/8 inch (42mm) square flat top surface with bevelled edges.The anvil is stamped '1/16" THICK' ...
View details
Antique Milk Churn Wooden Match Striker Pot *SOLD*
£0.00
A wonderful antique wooden match striker pot in the form of a milk churn.Brass handles and striker plate.Fantastic colour and wear throughout.31/8 inc...
View details
Smoothing Plane Bottle Opener marked OLHOVL
£19.00
A useful small wooden bottle opener in the form of a smoothing plane.Marked 'OLHOVL' which translates from Danish to Beer Plane.3 inches or 90mm overa...
View details
MARPLES Drawbore Pins *SOLD*
£0.00
A very good vintage pair of tapered (1/2 inch max diameter) steel drawbore pins by MARPLES of Sheffield.Each pin is marked 'W MARPLES & SONS', a f...
View details
Set of 24 JOHN WILSON Brace Bits - Centre Bits
£75.00
A scarce single owner set of 24 little used brace bits by JOHN WILSON of Sheffield.Made up of 9 centre bits, 6 nose bits, 3 shell bits, 1 taper bit an...
View details
WILLIAMS SUPERSLIM DTF 108 Metric Spanner
£10.00
A good WILLIAMS SUPERSLIM DTF108 metric spanner.Marked '8MM WILLIAMS SUPERSLIM DTF 108 10MM' to one side of the shaft.7 inches (178mm) overall length.
View details
Vintage Bent Blunt Caulking Iron
£30.00
A vintage or antique bent blunt caulking iron.The working edge is approximately 2 inches wide.A few surface spots, please see images.91/4 inches overa...
View details