An early 20th century American STANLEY No.75 bull nose rabbet plane.Fitted with a good length 11/16 inch cutter blade marked 'STANLEY NEW BRITAIN CONN...

A tidy flat soled adjustable STANLEY malleable iron spokeshave.Fitted with 21/8 inch English STANLEY cutter, 7/16 inch remains below the slot, a few m...

A good STANLEY 41/2 smoothing plane.This example has very thick sides and may well be WW2 production.Dismantled, cleaned, checked, oiled and reassembl...

A very little used HOCK 1 3/8 inch block plane blade.Made from A2 Cryo steel.The centre slot is a touch over 9/16" or 15mm wide.13/16" (30mm) remains ...

A very little used right hand LIE NIELSEN plane blade or iron.To fit the 140 skew block plane RH.11/2 inches wide, 1/8" thick, 43/4" overall length.

A very little used, possibly unused CLIFTON No.4 1/2 smoothing plane by Clico of Sheffield.This is the sought after earlier green model produced by Cl...

An unused, new old stock, VERITAS A2 1 5/8 inch plane blade or iron.To fit the VERITAS standard and low angle block planes.In the original card box wi...