- Home
- Oceania Carvers Mallet - Carving Mallet
Add To Your WishlistOceania Carvers Mallet - Carving Mallet
Add To Your WishlistOceania Carvers Mallet - Carving Mallet
£0.00
£55.00
In stock: 1
Sorry! We're out of stock
SKU: 2930l
Earn
0 reward points
A very attractive wood carvers mallet.
Although we have not identified the timber, it's previous owner believes the wood is from the Oceania region and possibly Papua New Guinea rosewood.
Wonderful colour.
Turned from two laminated pieces, the join can just be seen in the images.
The head is approximately 37/8 inches (98mm) in diameter at its widest point and 31/2" (90mm) long.
A few very minor surface knocks.
No previous owner's stamps.
Total weight of 1lb 83/8 ounces (692g).
91/8 inches (230mm) overall length.
You may also like...
FG PEARSON Strapped Claw Hammer
£35.00
A good antique Kent pattern strapped claw hammer with octagonal neck by FG PEARSON & CO of Sheffield.Marked 'PEARSON & CO SHEFFIELD' on one ch...
View details
Brass Plated Button Pad Beech Brace
£55.00
A good button pad beech brace.Ebony head with brass button and neck.There are a few small chips to the lower edge of the ebony head and two small shak...
View details
Vintage Brass Pump Spayer
£19.00
A slender brass pump sprayer.Hardwood handle with brass ferrule.1/2 inch diameter tube with a small vent hole at the top.The end rose cap has 12 holes...
View details
MARPLES No.14 Curved Carving Gouge - 1/4 inch
£22.00
A very good 1/4 inch or 7mm No.14 sweep curved carving gouge by MARPLES of Sheffield.Marked 'W.MARPLES & SONS SHEFFIELD ENGLAND' to the underside ...
View details
PFEIL Series 12L Long Bent V Tool - 10mm
£26.00
A very good 3/8 inch or 10mm PFEIL Series 12L long bent 60 degree v tool.Marked '12' with the Arrow trade mark on the blade.Octagonal ash wood handle ...
View details
SALMENS Yellow Lake Oilstone
£29.00
A good natural Yellow Lake oil stone or water hone by AB SALMENS SUCCESSORS LTD of London.Also known as a Llyn Melynllyn (Welsh for Yellow Lake) stone...
View details
SJ ADDIS Vee Carving Tool or Parting Tool - 5/16" 7mm
£19.00
A good 5/16 inch or 7mm No.39 sweep 60 degree v carving chisel or parting tool by SJ ADDIS.Marked 'SJ ADDIS CAST STEEL 39 ENGLAND' with the Hammers ov...
View details
Vintage Hand Vice
£15.00
A good vintage hand vice.Retains much of its original black finish.17/16 inch (35mm) wide jaws showing a few signs of use, please see images.Good stro...
View details