- Home
- Pair of FROST Cranked Gouges with Kensington Pattern Handles *SOLD*
Add To Your WishlistPair of FROST Cranked Gouges with Kensington Pattern Handles *SOLD*
Add To Your WishlistPair of FROST Cranked Gouges with Kensington Pattern Handles *SOLD*
£0.00
£0.00
In stock: 0
Sorry! We're out of stock
SKU: 3250p
Earn
0 reward points
A scarce pair of cranked firmer or scribing gouges by J FROST of Norwich.
We have seen very few of these gouges over the years and general opinion would suggest that they were intended for use by violin makers or luthiers.
The beech wood Kensington pattern handles are scarce in their own right and their shape adds value to the suggested use mentioned above.
Slightly cranked shallow in-cannel profiles, in sizes 1/2 and 7/8 inch.
A few minor surface spots, please see images.
Both are marked 'J FROST NORWICH' to the top of the blades.
The handles have brass ferrules and previous owner's marks of 'J.A.CONNOLY'.
93/4 and 105/8 inches (247-270mm) overall length.
Will require sharpening before use.
You may also like...
HENRY TAYLOR No 13 Curved Carving Gouge - 1/4" 6mm
£16.00
A little used, possibly unused, slightly over 1/4 inch (6mm) wide No 13 curved carving gouge by HENRY TAYLOR of Sheffield.Marked 'H TAYLOR ENGLAND 13'...
View details
SJ ADDIS No.3 Carving Gouge - 1/4 inch
£16.00
A tidy 1/4 inch or 6mm SJ ADDIS No.3 sweep straight carving gouge.Marked 'SJ ADDIS' with the Ward & Payne Hammers over Anvil trade mark on the und...
View details
WARD & PAYNE 3/8 inch Socket Chisel
£18.00
A good 3/8 inch or 9mm socket chisel by WARD & PAYNE of Sheffield.Marked 'WARD CAST STEEL' with the Hammers over Anvil trade mark to the top of th...
View details
MARPLES Deep Carving Gouge or Veining Tool - 1/16 inch
£19.00
A very good 1/16 inch or 2mm deep veiner or carving gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS' to one side of the blade.Not marked wi...
View details
MARPLES 1/8 inch 3mm Bevel Edge Chisel *SOLD*
£0.00
A very good slightly over 1/8 inch or 3mm MARPLES bevel edge chisel.Marked '1/8 in MARPLES MADE IN ENGLAND 3mm' on one side of the blade.Excellent ash...
View details
Vintage Bent Caulking Iron or Making Iron
£35.00
A vintage or antique bent single crease caulking iron.Also known as a making iron.The working edge is approximately 21/8 inches wide.A few surface spo...
View details
SJ ADDIS No.11 Deep Carving Gouge - 3/16 inch
£15.00
A tidy 3/16 inch or 5mm SJ ADDIS No.11 sweep deep carving gouge.Marked 'SJ ADDIS' with the Ward & Payne Hammers over Anvil trade mark on the top o...
View details
ASHLEY ILES No 3 Straight Carving Gouge - 5/8 inch
£19.00
A little used 5/8 inch or 15mm No.3 shallow straight carving gouge by ASHLEY ILES.Faintly marked 'ASHLEY ILES LTD MADE IN ENGLAND' on the top of the b...
View details