- Home
- RABONE 1377 Boxwood Rule - 2 foot 4 fold
Add To Your WishlistRABONE 1377 Boxwood Rule - 2 foot 4 fold
Add To Your WishlistRABONE 1377 Boxwood Rule - 2 foot 4 fold
£0.00
£18.00
In stock: 1
Sorry! We're out of stock
SKU: 3075g
Earn
0 reward points
A good RABONE No.1377 2 foot 4 fold boxwood rule.
Marked 'BOXWOOD RABONE MADE IN ENGLAND No1377'.
Also stamped 'L.C.C'
Arch main joint with brass tipped ends.
Divided into eighths, tenths, twelfths and sixteenths.
5/8 inch wide sections.
Retains the brass locating pin and much of the original lacquer finish.
A clean and tidy example.
You may also like...
Brass Plated Rosewood Spirit Level
£29.00
A very nice heavy brass plated rosewood spirit level.The top brass plate has decorative viewing windows.Clear bubble and tube are intact.Brass tipped ...
View details
FISHER No 1532 Steel Rule - 2 foot
£12.50
A very little used No 1532 2 foot folding steel rule by O FISHER & CO.This rule has been in storage for a number of years and came to us with its ...
View details
Boxed STANLEY 71 Router Plane - Unused
£165.00
A fine and unused STANLEY No.71 router plane.Complete with all three (1/4 inch, 1/2 inch & vee) full length cutters, fence and depth stop with foo...
View details
AXMISTER Workshop Sliding Bevel - 10 1/2 inch
£19.00
A probably unused AXMINSTER Workshop sliding bevel.Laminated bamboo stock.101/2 inch steel blade with the majority of its original blued finish, a few...
View details
'MR (L) 10' Metal Hand Stamp - Punch - Midland Railway
£16.00
A little used steel hand stamp, punch or mark maker.Creates a mark, 'MR (L) 10' within a circle border, approximately 1/2 inch (12mm) in diameter.Poss...
View details
MARPLES Deep Carving Gouge or Veining Tool - 1/16 inch
£19.00
A very good 1/16 inch or 2mm deep veiner or carving gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS' to one side of the blade.Not marked wi...
View details
G WHITEHEAD Name Stamp - Punch or Mark Maker
£18.00
A good steel name stamp, punch or mark maker.Creates a clear mark, 'G.WHITEHEAD', approximately 1/8 inch high by 11/4 inch wide.3 inches overall lengt...
View details
HENRY TAYLOR Fishtail Carving Gouge - 3/8 inch
£21.00
A good, just under 3/8 inch or 9mm, fishtail carving gouge by HENRY TAYLOR of Sheffield.Marked 'H TAYLOR SHEFFIELD ENG' with the Acorn trade mark to t...
View details