- Home
- RECORD 405 Special Base - No 10 Hollow
Add To Your WishlistRECORD 405 Special Base - No 10 Hollow
Add To Your WishlistRECORD 405 Special Base - No 10 Hollow
£0.00
£58.00
In stock: 1
Sorry! We're out of stock
SKU: 3176n
Earn
0 reward points
A very good No 10 hollow base with cutter for the RECORD 405 Combination Plane.
Marked 'RECORD No10H' on the casting.
Good length tungsten steel cutter, a few minor surface spots, please see images.
Complete with its original blue card box with trade label.
You may also like...
ECLIPSE 120 Pin Vice Set
£24.00
A tidy vintage boxed set of four ECLIPSE pin vices.Nos.121, 122, 123 and 124 providing a capacity range from 0 to 5mm or 0 to 0.196".All are marked 'E...
View details
Infill Smoothing Plane
£125.00
A good parallel sided infill smoothing plane.Brass lever cap with attractive knurled screw.Fitted with a 21/8 inch JAMES HOWARTH blade iron and KIMBER...
View details
Boxed STANLEY 71 Router Plane *SOLD*
£0.00
A very good and little used STANLEY No.71 router plane.Complete with all three (1/4 inch, 1/2 inch & vee) cutters, fence and depth stop with foot....
View details
2 foot 4 fold RABONE 1167 Boxwood Rule
£15.00
A tidy RABONE 1167 2 foot 4 fold boxwood rule.Marked 'BOXWOOD RABONE MADE IN ENGLAND No.1167'.Divided into eighths and sixteenths on opposite sides.An...
View details
Upholsterers Hammer
£29.00
A very good strapped upholsterers' hammer.Also known as a London cabriolet hammer.Marked '69' within a circle to one cheek.9/16" (15mm) diameter round...
View details
THOMAS WALES Plane Blade Iron - 2 1/4 inch
£15.00
A good length 2 1/4 inch THOMAS WALES & SONS plane blade iron.Circular 'ALL BRITISH QUALITY' THOMAS WALES trade mark.29/16 inches remaining below ...
View details
Antique Chariot Plane by SLATER ?
£110.00
A good antique chariot plane, believed to be by SLATER of LondonSimilar in profile and with the same distinct brass bridge to those produced by this w...
View details
ROBERT SORBY Bevel Edge Chisel - 6mm 1/4"
£18.00
A very little used, probably unused ROBERT SORBY traditional bevel edge chisel.Described as a 500 C.A.B. handled chisel in the catalogue.Marked 'ROBER...
View details