- Home
- STANLEY 5 1/2 Jack Plane
Add To Your WishlistSTANLEY 5 1/2 Jack Plane
Add To Your WishlistSTANLEY 5 1/2 Jack Plane
£0.00
£75.00
In stock: 1
Sorry! We're out of stock
SKU: 2788y3
Earn
0 reward points
A very tidy and little used STANLEY No 5 1/2 jack plane.
Heavier and wider than the No.5 jack plane.
Dismantled, cleaned, checked, oiled and reassembled.
Fitted with a near full length 23/8 inch English STANLEY blade iron and matching cap iron, a little over 21/8 inches remain below the slot.
Retains the almost all of its original finish throughout.
Very good hardwood handles with much of their original lacquer finish.
A few minor surface scratches and spots, please see images.
All parts move freely and tighten securely.
15 inches overall length.
*International (non UK) customers, please contact us for shipping rates on this item.
You may also like...
ECLIPSE 77 Saw Set with Narrow Hammer *SOLD*
£0.00
A tidy ECLIPSE No.77 saw set with narrow hammer.At approximately 1/16 inch wide, this slimmer hammer is useful for those saws with smaller teeth.Marke...
View details
STANLEY 80 Cabinet Scraper
£39.00
A tidy STANLEY No 80 cabinet scraper.Marked 'STANLEY MADE IN ENGLAND' on the clamping bar.Fitted with a good length STANLEY 23/4 inch (70mm) steel bla...
View details
LIE NIELSEN Boggs Spokeshave Blade
£40.00
A very little used LIE NIELSEN spokeshave blade.To fit the LIE NIELSEN Boggs spokeshaves.2 inches wide, 1/8" thick, 111/16" overall length.
View details
G12 007 STANLEY No 7 Jointer Plane
£99.00
A barely used more recent G12 007 English STANLEY No.7 jointer plane.Dismantled, cleaned, checked, oiled and reassembled.Fitted with a near full lengt...
View details
Small Ball Pein Planishing Repousse Hammer
£19.00
A small vintage ball pein or peen hammer that has been used for planishing or repousse work.5/8 inch (15mm) diameter faces, please see close-up images...
View details
Pair of Jewellers' Steel Bench Blocks
£25.00
A useful pair of small rectangular steel bench blocks or anvils.1.) 40 x 28mm by 22mm in height.2.) 58 x 40mm by 29mm in height.Both have rounded edge...
View details
Infill Smoothing Plane
£110.00
A good parallel sided infill smoothing plane.Brass lever cap with attractive knurled screw.Fitted with a 21/8 inch JAMES HOWARTH blade iron and KIMBER...
View details
COLQUHOUN & CADMAN 1/8 inch V Carving Tool - No 39 Sweep
£17.00
A good 1/8 inch or 3mm 60 degree vee carving tool by COLQUHOUN & CADMAN of Sheffield.Marked 'COLQUHOUN & CADMAN' to the underside of the blade...
View details