Two user shaped wood turning hollowing tools or scrapers.Both have 3/8 inch (9mm) round shanks).Please see close-up images of the tip profiles.Very go...

A little used 3/8 inch or 9mm H64 ASHLEY ILES pointy tool.Very good ash wood handle with brass ferrule.55/8 inches (142mm) from the point to the ferru...

A very little used, probably unused, Reg Sherwin roughing out gouge by ASHLEY ILES.Marked 'ASHLEY ILES LTD MADE IN ENGLAND' near the ferrule plus 'REG...

A good Diamic brand 1/4 inch or 6mm bowl gouge by HENRY TAYLOR of Sheffield.Very good hardwood handle with brass ferrule and Diamic trade label.55/16 ...

A very good little used Diamic 3/8 inch or 9mm parting tool by HENRY TAYLOR of Sheffield.Very good hardwood handle with brass ferrule and the Diamic t...

A very large 2 inch or 50mm wide turning chisel by ROBERT SORBY of Sheffield.Marked 'ROBT SORBY SHEFFIELD' with the Kangaroo trade mark on the blade.T...

A good early cast steel socket wood turning gouge by ISAAC GREAVES of Sheffield.7/16 inch or 11mm wide at the bevel.Marked 'ISAAC GREAVES CAST STEEL' ...

A probably unused MARPLES No 997 wood turners' parting tool.Marked 'W MARPLES & SONS SHEFFIELD ENGLAND' with the Shamrock trade mark to one side o...

A good 1/2 inch or 12mm parting tool by NOOITGEDAGT of Holland.Sharpened by the previous owner, please see close-up images.Very good hardwood handle w...

A good RECORD POWER 3/16 inch or 4.5mm parting tool.Very good hardwood handle with brass ferrule and RECORD POWER trade mark.73/16 inches (183mm) from...

A good heavy duty round nose scraper by SJ & JB ADDIS of Sheffield.1 inch (25mm) wide and 1/4 inch (6mm) thick.Very good ash wood handle with bras...

A good swan neck hollowing tool by SJ & JB ADDIS of Sheffield.Fitted with a 3/16 inch or 4mm pointed bit, please see close-up image.Very good ash ...

A good triangle shear scraper by SJ & JB ADDIS of Sheffield.9/16 inch (25mm) triangular steel.Very good ash wood handle with brass ferrule and tra...