- Home
- Unused HENRY TAYLOR No 27 Spoon Carving Gouge Blade
Add To Your WishlistUnused HENRY TAYLOR No 27 Spoon Carving Gouge Blade
Add To Your WishlistUnused HENRY TAYLOR No 27 Spoon Carving Gouge Blade
£0.00
£16.00
In stock: 1
Sorry! We're out of stock
SKU: 3105j
Earn
0 reward points
An unused HENRY TAYLOR No.27 sweep spoon bent carving gouge blade.
1/2 inch or 13mm wide at the cutting edge.
Marked 'H TAYLOR ENGLAND 27' with the Acorn trade mark on one side of the blade and 'MADE IN ENGLAND' on the opposite side.
Also stamped '27' on the tang.
There is a small chip to the cutting edge and this unused tang will require sharpening/honing before use, please see close-up image.
Retains the original black finish throughout with the straw finish to the inside of the spoon, please see images.
51/8 inches (130mm) from the shoulder to the cutting edge, 63/4" (173mm) overall length.
You may also like...
IBBOTSON 3/16 inch Straight Carving Gouge
£16.00
A good 3/16 inch or 5mm straight carving gouge by Thomas IBBOTSON & Co of Sheffield.Marked 'THOS IBBOTSON & CO CAST STEEL' with the Omega trad...
View details
CHARLES HILL 3/8 inch Curved Carving Gouge
£21.00
A good 3/8 inch or 9mm curved carving gouge by CHARLES HILL of Sheffield.Marked 'C HILL SHEFFIELD' with the Cannon trade mark on the top of the blade....
View details
MC403 FLEXCUT No 3 x 1 inch Mallet Carving Tool
£25.00
A good 25mm or 1 inch wide MC403 No.3 mallet carving tool from FLEXCUT USA.This fixed handle tool is designed to be used by hand or with a mallet.Mark...
View details
JB ADDIS No 31 Deep Spoon Carving Gouge - 1/4 inch
£21.00
A good 1/4 inch or 6mm JB ADDIS No.31 sweep spoon bent carving gouge.Marked 'JB ADDIS & SONS SHEFFIELD ENG 31' on one side of the blade and '10 PR...
View details
PFEIL No 9a Spoon Bent Gouge - 7mm *SOLD*
£0.00
A very good 1/4 inch or 7mm PFEIL Series 9a spoon bent carving gouge.Marked '9' with the Arrow trade mark on the blade.Octagonal ash wood handle marke...
View details
SJ ADDIS No.21 Spoon Carving Chisel - 3/8 inch
£17.00
A very good 3/8 inch or 9mm SJ ADDIS No.21 sweep spoon carving chisel.Marked 'SJ ADDIS CAST STEEL' with the WARD & PAYNE trade mark on one side of...
View details
Pair of FROST Cranked Gouges with Kensington Pattern Handles
£58.00
A scarce pair of cranked firmer or scribing gouges by J FROST of Norwich.We have seen very few of these gouges over the years and general opinion woul...
View details
Antique Fishtail Carving Gouge - 3/16 inch 5mm
£21.00
A good 3/16 inch or 5mm deep fishtail carving gouge.No obvious maker's mark but clearly professionally made.Not marked with a sweep number however thi...
View details