- Home
- Chisels & Gouges
- 1/4 inch Sash Mortice Chisel
Add To Your Wishlist1/4 inch Sash Mortice Chisel
Add To Your Wishlist1/4 inch Sash Mortice Chisel
£0.00
£19.00
In stock: 1
Sorry! We're out of stock
SKU: 2646b
Earn
0 reward points
A very good 1/4 inch or 6mm sash mortice chisel.
Stamped '2' on one side of the blade.
A few minor surface spots, please see images.
Very good boxwood handle with brass ferrule and leather washer.
No previous owner's stamps.
129/16 inches (319mm) overall length.
You may also like...
ROBERT SORBY Bevel Edge Chisel - 6mm 1/4"
£18.00
A very little used, probably unused ROBERT SORBY traditional bevel edge chisel.Described as a 500 C.A.B. handled chisel in the catalogue.Marked 'ROBER...
View details
Early GREEN Mortice Chisel - 1/8 inch - Pig Sticker - for restoration
£15.00
An early 1/8 inch or 3mm mortice chisel by GREEN of Sheffield.Sometimes referred to as a pig sticker mortise chisel.Marked 'GREEN' on one side of the ...
View details
SJ & JB ADDIS Triangle Shear Scraper
£20.00
A good triangle shear scraper by SJ & JB ADDIS of Sheffield.9/16 inch (15mm) triangular steel.Very good ash wood handle with brass ferrule and tra...
View details
J CARVER Caulking Iron - Jerry Iron
£30.00
A vintage or antique cast steel jerry pattern caulking iron by J CARVER.Marked 'J CARVER' to one side with 'CAST STEEL' to the other.Plenty of manufac...
View details
Set of 5 Small Turning Tools marked 372
£59.00
A set of five smaller wood turning chisels or parting tools.Numbered 2, 3, 4, 5 & 6.All are also marked '372' within a circular border on the blad...
View details
NORTON India Combination Oilstone - Sharpening Stone
£29.00
A little used NORTON Pike brand India combination oil stone or sharpening stone.8 by 2 by 1 inches (204 x 51 x 25mm) overall.Faintly marked 'FINE' to ...
View details
Vintage WASHITA Oilstone - Sharpening Stone
£45.00
A vintage WASHITA oil stone.This stone measures approximately 8 by 2 by 1 inches (203 x 51 x 26mm) overall.One surface is pretty flat and smooth, the ...
View details
SORBY 1 1/4 inch Paring Gouge
£23.00
A tidy 1 1/4 inch or 32mm wide in-cannel paring gouge by SORBY of Sheffield.Marked 'I SORBY SHEFFIELD' with the Mr Punch trade mark on the blade.A few...
View details














