A very good pair of teardrop shaped forming, raising or planishing stakes.1.) marked 'G 3' to one side, 13/8 inch by 7/8" (35 x 22mm) surface, 3" (75m...

A nice antique hammer.Believed to be either a drill hammer or possibly a Blacksmiths' hammer.The faces are approximately 13/8 inches (35mm) square wit...

A nice vintage archimedean drill.Knurled brass detail throughout.Ebonised hardwood head.All parts move freely and tighten securely.No previous owners ...

An interesting vintage ball pein or peen hammer.Probably a conversion by the previous owner and ideal for tight spaces.13/16 inch (24mm) diameter dome...

A vintage double ended round head metal forming stake anvil or dolly.The smallest end is 13/8 (35mm) in diameter, the largest is 17/8" (47mm) in diame...

A vintage jewellers' round steel ring triblet or mandrel.Graduated from approximately 7.5mm to 24mm over 240mm.Knurled grip with remains of the red fi...

A vintage jewellers' square steel triblet or mandrel.Graduated from approximately 7mm to 24mm square over 305mm.Knurled grip with remains of the red f...

A steel horn shaped jewellers' or silversmiths' forming stake or anvil.Possibly craftsman made.57/8 inches (150mm) long, 13/16" (30mm) at its widest p...

A vintage KW 355 stake anvil holder or plate.Marked 'KW 355 JHM' to the top.Designed to be set into the bench, four fixing holes.The tapered socket is...

A vintage tinmans' or tinsmiths' KW 359 metal forming stake or stake anvil.Marked 'KW 359 JHM' to one side.3 inch (75mm) wide offset head or face.The ...

A substantial vintage JHM square head metal forming stake or stake anvil.Faintly marked 'JHM' to one side.41/4 inch (108mm) square flat head or face w...

A vintage KW 350 mushroom head metal forming stake or stake anvil.Marked 'KW 350' to one side.35/8 inch (94mm) diameter mushroom head or face.The shan...

A vintage KW 353 ball head metal forming stake or stake anvil.Marked 'KW 353' to one side.11/2 inch (38mm) diameter round head or face.The shank taper...

A vintage JHM KW 355 stake anvil plate or holder.Marked 'KW 355 JHM' to the top.Designed to be set into the bench, four fixing holes.The tapered socke...

A large vintage Exeter pattern riveting hammer.15/16 inch (34mm) diameter face and cross pein, 6" (153mm) between the faces.Very good hardwood (hickor...

A large pair of forged steel tin shears or snips by ATCO USA.Marked 'ATCO FORGED STEEL MADE IN USA' on one blade.3 inch long cutting edges.Retains the...

A small MARPLES vice, believed to be a No.4677 precision table vice.The vice is designed to fit on a separate base (not included with this example) us...

A useful pair of small rectangular steel bench blocks or anvils.1.) 40 x 28mm by 22mm in height.2.) 58 x 40mm by 29mm in height.Both have rounded edge...

A good pair of mushroom forming, raising or planishing stakes.Sometimes also referred to as a mushroom dolly.1.) 13/4 inch (44mm) diameter head, 61/8"...

An interesting piece of petrified or fossilised wood.At least a few hundred thousand years old and most likely much older.This piece is approximately ...

A small vintage ball pein or peen hammer that has been used for planishing or repousse work.5/8 inch (15mm) diameter faces, please see close-up images...

A very good vintage SYKES No 561 planishing hammer with round and square faces.Marked '561' with the Diamond SYKES trade mark on one side of the handl...

A scarce vintage SYKES Tools of Progress display stand.Joe SYKES was the original salesman at JW Pickavant & Co Ltd during the 1920s and left to s...