A pair of similar 'new old stock' vintage metal drawer pulls or cabinet handles.Matching backing plates approximately 11/8 inches in diameter.11/4 inc...

A good vintage reclaimed cast iron door knocker.Oval shape with clam shell decoration to the top and bottom of the ring.Two fixings holes in the back ...

A group of three vintage 'new old stock' CLIFFORD No.3578 21/2 inch polished brass handrail brackets.Screws included.

Genuine 'new old stock' of NETTLEFOLDS brass and light BMA (bronze metal antique) screws.Unused but may show signs of tarnishing.Supplied in a clear p...

Genuine 'new old stock' of NETTLEFOLDS steel and japanned screws.Unused but may show signs of light surface rust.Supplied in a clear packs of 25 screw...

A pair of reclaimed vintage covered keyhole escutcheons with swing covers.Coppered finish, please see images.2 fixing holes, 3/4 inch (20mm) between t...

A pair of unused vintage 'new old stock' brass door knobs or handles.Octagonal knobs and backing plates, the backing plates are 23/8 inches or 60mm in...

A pair of unused vintage 'new old stock' round or ball shaped brass door knobs or handles.The round backing plates are 25/16 inches or 58mm in diamete...

Pairs of reclaimed vintage bronze combination card frames and pulls.6 fixing holes, 33/8 inches between the fixing hole centres.The card 'windows' are...

A reclaimed vintage brass cabinet or door handle.Graceful Art Nouveau design.Plenty of patina to the surface of this cast brass handle.7 inches (175mm...

An unused set of four SHEPHERD No.51 metal ball castors with square plates.21/2 inch diameter wheels.Full original finish remains on all four castors....

A set of 5 reclaimed vintage cast metal drawer pulls or cabinet handles.Sum 'rubbed' wear to the original finish, please see images.Two fixing holes p...

A good reclaimed vintage brass escutcheon plate.Nicely bevelled edges.4 fixing holes.3/8" (10mm) long keyhole.43/8" (110mm) by 213/16" (72mm) overall.

A reclaimed brass finger plate.6 fixing holes.12 inches (305mm) by 211/16" (68mm) overall.

A reclaimed vintage brass hollow or socket castor with brown china wheel.7/8 inch (22mm)deep socket, three fixing holes.13/16 inch (30mm) maximum inte...

A reclaimed vintage brass socket or hollow castor with brass wheel.11/16 inch (27mm) deep socket, three fixing holes.11/2 inch (38mm) maximum internal...

A choice of three registered design cast iron number plates with solid brass numbers.Numbers 26, 83 & 106 available.Each is marked 'PW & A LIM...

A good pair of vintage brass cabinet handles.35/16 inch wide back plate.Some tarnishing, please see images.