A very little used HOCK 1 3/8 inch block plane blade.Made from A2 Cryo steel.The centre slot is a touch over 9/16" or 15mm wide.13/16" (30mm) remains ...

A very little used HOCK 1 5/8 inch block plane blade.Made from A2 Cryo steel.The centre slot is a touch over 9/16" or 15mm wide.13/16" (30mm) remains ...

A good 12 inch DMT diamond sharpening system by DIAMOND MACHINING TECHNOLOGY Inc USA.The stone measures 12 by 25/8 inches.12 inch diamond whet stones ...

A useful group of three assorted steel cabinet scraper blades.Some minor surface scratches and spots, please see images.Between 51/8 and 57/8 inches (...

An unused, new old stock, 50mm plane blade iron or cutter by GOLDENBERG of France.The label reads '1 FER E 030 A 50 4 97 732'.Two slots at the top of ...

A tidy round or curved face RECORD A151 malleable iron spokeshave.Marked 'RECORD No A151' on the cap.Good length 21/8 inch RECORD cutter, a touch unde...

A good antique American STANLEY low knob No.4 smoothing plane.Believed to be a type 11 example, circa 1910 - 1918.Dismantled, cleaned, checked, oiled ...

An early 20th century American STANLEY No.75 bull nose rabbet plane.Fitted with a good length 11/16 inch cutter blade marked 'STANLEY NEW BRITAIN CONN...

A very tidy American STANLEY No.9 1/4 block plane.Marked 'No 91/4' on the left side.Similar to the STANLEY 91/2 block plane but without the adjustable...

A good American STANLEY No 10 bench rebate or carriage makers' rabbet plane.Dismantled, cleaned, checked, oiled and reassembled.'STANLEY MADE IN USA' ...

A more recent and probably unused ANANT A77 bullnose rebate plane.Based on the RECORD 077 plane.Full length 11/8 inch wide adjustable cutter with its ...

A very little used, possibly unused CLIFTON No.4 1/2 smoothing plane by Clico of Sheffield.This is the sought after earlier green model produced by Cl...

A very tidy and little used CLIFTON 420 shoulder rebate plane.Similar to the Record 042 shoulder plane.The manufacturer states:"The Clifton 420 Should...

A good curved or round face STANLEY adjustable spokeshave.Marked 'MADE IN ENG Q' on the back of the handles.Good length 21/8 inch STANLEY cutter, 1/2 ...

A tidy early MARPLES M4 smoothing plane.Believed to be a type 3 circa late 1930s.Dismantled, cleaned, checked, oiled and reassembled.Marked 'MARPLES' ...

A tidy and little used early RECORD No.076 bullnose rabbet or rebate plane.Marked 'No076' on the right side with 'RECORD BRITISH' on the lever cap.Tri...

A very good early 20th century American STANLEY No.53 adjustable mouth spokeshave.This early example has the brass adjusting screw.'BAILEYS PATENT JUL...

A very good PRESTON No 1374P patent iron spokeshave.Marked 'E PRESTON & SONS' on the cap.PRESTON'S patent cutter adjustment.Raised hollow or open ...

A good length 1 5/8 inch EDWARD PRESTON cast steel plane blade iron.Clear EP trade mark.115/16 inches remaining below the slot.This tapered blade is a...

A good STANLEY 41/2 smoothing plane.This example has very thick sides and may well be WW2 production.Dismantled, cleaned, checked, oiled and reassembl...

A very tidy and little used nickel plated No.10 block plane by HOBBIES Ltd of Dereham, Norfolk..Possibly the best example we have seen with almost all...

A very little used HOCK replacement blade for No.80 type cabinet scrapers.Made from high carbon steel.To fit the STANLEY 80 and RECORD 080 scraper pla...

A very little used HOCK replacement blade for adjustable spokeshaves.Made from A2 Cryo steel.21/8 inches (54mm) wide.5/8" (16mm) remains below the slo...