A very good and little used 1 1/2 inch or 38mm wide registered firmer chisel by I & H SORBY of Sheffield.Marked 'I & H SORBY SHEFFIELD ENGLAND...

A good joiners' best steel mortice chisel with oval handle by Joseph Buck of London.A little over 1/4 inch or 7mm wide at the cutting edge.Sometimes r...

A very little used 1/4 inch or 6mm cranked paring gouge by MARPLES of Sheffield.Excellent boxwood handle with brass ferrule, MARPLES trade mark and al...

A very good 1/4 inch or 6mm sash mortice chisel.Stamped '2' on one side of the blade.A few minor surface spots, please see images.Very good boxwood ha...

A good 12 inch DMT diamond sharpening system by DIAMOND MACHINING TECHNOLOGY Inc USA.The stone measures 12 by 25/8 inches.12 inch diamond whet stones ...

A very good 5/16 inch or 24mm hollow back Japanese chisel.We have not identified the maker from the touch marks however one of the characters translat...

Two bevel edge chisels with red unbreakable handles by NOOITGEDAGT of Holland.Sizes: 12mm (1/2") and 18mm (3/4").Both blades are marked 'SWEDISH STEEL...

A pair of interesting MARPLES 3/4 inch chisels.Most likely adapted by the previous owner.Both are 3/4" or 19mm wide and appear to have started out as ...

A group of three medical orthopaedic or surgical bone chisels and gouges.1.) Chisel marked '3/8', octagonal grip/handle, 3/8 inch or 10mm wide at the ...

A good 3/16 inch or 4mm cast steel sash mortice chisel.Marked 'CAST STEEL' on the blade.A few minor surface spots, please see images.Very good octagon...

A little used LIE NIELSEN 3/16 inch 01 bevel edge chisel.No longer available from LIE NIELSEN.Based on the STANLEY 750 bevel edge chisels.Marked 'LIE ...

A good 3/8 inch or 9mm mortice chisel by MARPLES of Sheffield.Marked 'W MARPLES & SONS SHEFFIELD' with the Shamrock trade mark to the blade.A few ...

A tidy 5/16 inch or 8mm cranked paring gouge.Not marked but clearly of factory manufacture.Good hardwood handle with brass ferrule, the ferrule has th...

A little used LIE NIELSEN 5/16 inch A2 bevel edge chisel.Based on the STANLEY 750 bevel edge chisels.Marked 'LIE NIELSEN USA' to the rear of the socke...

An unused 5/8 inch registered mortice chisel by CROWN TOOLS of Sheffield.A touch under 5/8 inch or 15mm wide at the cutting edge.Excellent registered ...

A good vintage 6 inch Gents' pattern drawknife.Marked 'WARRANTED' to the top of the blade.Good beechwood handles with brass ferrules and steel tang wa...

A group of six vintage wooden handled small cabinet scrapers.Understood to have been used in a furniture factory.The blades vary in width from 5/8 to ...

A little used LIE NIELSEN 7/16 inch A2 bevel edge chisel.Based on the STANLEY 750 bevel edge chisels.Marked 'LIE NIELSEN USA' to the rear of the socke...

A very nice antique drawer lock chisel.The widest cutting edge measure 7/8 inch (22mm) wide, the smaller is 1/4" (6mm) wide.A few signs of use, please...

A good 5/16 inch or 7mm sash mortice chisel by BUCK & RYAN of London.Marked 'BUCK & RYAN' on the blade.A few minor surface spots, please see i...

What we believe to be a Llyn Idwal Welsh sharpening stone for restoration.This stone is olive green in colour with some darker spots/swirls.Measuring ...

A little used drawer lock chisel.The cutting edges measure 3/8 inch (10mm) wide.Octagonal grip, patches of the original black finish remain, please se...

An early 1/8 inch or 3mm mortice chisel by GREEN of Sheffield.Sometimes referred to as a pig sticker mortise chisel.Marked 'GREEN' on one side of the ...