2 unused imperial sized milling tools or reamers.Please see labels and images for details.

A little used group of 5 machine bits by RIDGWAY of Sheffield.Sizes: 1/4, 3/8, 7/16 & (2x) 9/16 inch.The 1/4" bit is unmarked, the 3/8" bit is mar...

An unused, new old stock, 50mm plane blade iron or cutter by GOLDENBERG of France.The label reads '1 FER E 030 A 50 4 97 732'.Two slots at the top of ...

A very little used LIE NIELSEN plane blade or iron.To fit the LIE NIELSEN 1001/2 convex sole block plane.7/8 inch wide, 1/8" thick, 115/16" overall le...

A very little used right hand LIE NIELSEN 140 plane blade or iron.To fit the 140 skew block plane RH.A few minor surface spots, please see images.11/2...

A very little used 2 3/8 inch LIE NIELSEN plane blade or iron.To fit the No 41/2, 51/2, 6 and 7 bench planes.21/8 inches remain below the slot.713/16 ...

A very little used LIE NIELSEN small router plane blade.1/4" pointed, BL - 271 1/4 PT.In its original paper envelope with trade label.

A very little used LIE NIELSEN spokeshave blade.To fit the LIE NIELSEN Boggs spokeshaves.2 inches wide, 1/8" thick, 111/16" overall length.

An unused new old stock 3/4 inch STANLEY No 92 shoulder plane blade iron.Marked 'STANLEY MADE IN ENGLAND'.4 inches in length.in its original packaging...

An unused, new old stock, VERITAS A2 1 5/8 inch plane blade or iron.To fit the VERITAS standard and low angle block planes.In the original card box wi...

An unused, new old stock, 1 1/2 inch VERITAS convex chairmakers' scraper blade.In the original packaging with label.

A pair of beech wood infill sections to fit the post War NORRIS A5 smoothing plane.These are the ones fitted to the casting with machine screws throug...

A very good No 10 hollow base with cutter for the RECORD 405 Multi Plane.Marked 'RECORD No10H' on the casting.Good length tungsten steel cutter, a few...

A good RECORD No.5 nosing tool base and cutter for the RECORD 405 Multi Plane.The base is marked 'RECORD NOSING TOOL' on the casting.The majority of t...

A very good near full length 3/4 inch wide cutter blade to fit the RECORD 405 Multi Plane no.10 round special base.Marked 'RECORD MADE IN ENGLAND TUNG...

Standard & special cutters for the RECORD 405 Multi Plane, RECORD 050C Combination Plane, RECORD 050A Improved Combination Plane etc.In our experi...

A 'new old stock' pair of hardwood replacement bench plane handles.The knob is 211/16 inches (68mm) in overall height.The rear handle stands 45/16" (1...

This LN - BL - 71 adapter from LIE NIELSEN allows the use of their small router plane blades in the large LIE NIELSEN router plane.

A very good, probably unused, SANDVIK rectangular steel cabinet scraper blade.Marked 'SANDVIK 474-125-080 SANDVIK AB SWEDEN' on one side.A few minor s...

A tidy original instruction booklet - A Manual of Family Sewing Machines & Their Attachments.Signed and dated on the cover by the previous owner i...

An unused new old stock STANLEY 1 3/4 inch or 44mm plane blade.To fit the STANLEY No.3 bench planes.Will also fit the equivalent RECORD planes.Retains...

A scarce genuine American STANLEY No.289 fillister and rabbet plane blade.Produced from 1911 to 1948 and rarely seen on this side of the Atlantic.This...

A new and unused STANLEY 0-12-338 block plane blade or iron.Marked 'STANLEY MADE IN ENGLAND'.35mm or 13/8 inches wide.To fit the 12-060 block planes.I...