A little used steel hand stamp, punch or mark maker by PRYOR of SheffieldCreates a mark, 'AHM', approximately 3/16 inch by 3/8" (5 x 9mm).The last ima...

A little used steel hand stamp, punch or mark maker.Creates a mark, 'MR (L) 10' within a circle border, approximately 1/2 inch (12mm) in diameter.Poss...

An uncommon 16 inch brass plated hardwood spirit level by Edward PRESTON of Birmingham.PRESTON offered very few 16 inch spirit levels and we believe t...

A more recent 16 inch Pro Combination Square by SWANSON USA.Machined die cast zinc head stock.Acrylic level vial.Brass fittings.Complete with scribe.R...

A little used RABONE No.1167 3 foot 4 fold boxwood rule.Marked 'BOXWOOD RABONE MADE IN ENGLAND No.1167'.Divided into eighths and sixteenths.Angled mai...

A good 4 1/2 inch GOVERNOR brand brass plated try square with graduated blade from JOHN SHAW & SONS of Wolverhampton.Marked with the Governor JS&a...

A very good STARRETT 436 XRL outside micrometer with ratchet stop and lock nut.Marked 'STARRETT' and '4IN No 436 5IN' on opposite sides of the frame.A...

A very good 5 - 6 inch STARRETT 436 outside micrometer with ratchet stop and lock nut.Marked 'STARRETT' and '5IN No 436 6IN' on opposite sides of the ...

A very nice, smaller than usual, rolling rule by J HALDEN of Manchester.Marked 'J HALDEN & CO LD MANCHESTER & LONDON' to the ebony baseBrass b...

A tidy 6 inch Hockley Abbey brand No.1622 spirit level by RABONE of Birmingham.Described in the catalogue as a narrow level, the 6 inch was the smalle...

A tidy 8 inch Hockley Abbey brand No.1621 spirit level by RABONE of Birmingham.Described in the catalogue as a narrow level.Marked 'MADE IN ENGLAND NO...

A probably unused AXMINSTER Workshop sliding bevel.Laminated bamboo stock.101/2 inch steel blade with the majority of its original blued finish, a few...

An attractive solid boxwood reel.For use with a plumb bob or chalk line.Wonderful golden honey colour.The slim centre section has minor ridges created...

A very nice heavy brass plated rosewood spirit level.The top brass plate has decorative viewing windows.Clear bubble and tube are intact.Brass tipped ...

A very good wheel marking gauge with micro adjustment.Solid brass head and micrometer adjuster with two knurled locking screws.Steel rod with V groove...

A nice antique rosewood cutting gauge or slitting gauge by BUCK of London.Marked 'BUCK TOT CT RD' to one side of the head stock.Brass wear strips, fer...

A little used sliding bevel by CROWN TOOLS of Sheffield.Brass plated beech wood stock with CROWN TOOLS trade mark.Fitted with a 71/2 inch steel blade ...

A good pair of dovetail squares by CROWN TOOLS of Sheffield.One square for 1:6 softwoods, the other 1:8 for hardwoods.Brass plated walnut stocks with ...

A vintage ECLIPSE 220 pocket scriber or scribe.Marked 'ECLIPSE No220 MADE IN ENGLAND' to the top, also marked 'ECLIPSE No220' on the pocket hook.Knurl...

A 9 inch (815/16" actual) brass plated ebony spirit level by Edward PRESTON of Birmingham.Marked 'E PRESTON & SONS' with the EP trade mark and 'WA...

A very little used No 1532 2 foot folding steel rule by O FISHER & CO.This rule has been in storage for a number of years and came to us with its ...

A good steel name stamp, punch or mark maker.Creates a clear mark, 'G.WHITEHEAD', approximately 1/8 inch high by 11/4 inch wide.3 inches overall lengt...

A good 113/4 inch brass plated hardwood spirit level by I & D SMALLWOOD of Birmingham.Birmingham's last rule and level maker, manufacturing up unt...