- Home
- Chisels & Gouges
- MARPLES 1/4 inch Cranked Paring Gouge
Add To Your WishlistMARPLES 1/4 inch Cranked Paring Gouge
Add To Your WishlistMARPLES 1/4 inch Cranked Paring Gouge
£0.00
£21.00
In stock: 1
Sorry! We're out of stock
SKU: 3318g
Earn
0 reward points
A very little used MARPLES 1/4 inch or 6mm cranked paring gouge.
Excellent boxwood handle with brass ferrule, MARPLES trade mark and almost all of its original lacquer finish, please see close-up images.
No previous owner's stamps.
A few minor surface spots on the blade, please see images.
131/4 inches (337mm) overall length.
May require sharpening before use.
You may also like...
MARPLES 1/2 inch No 3 Carving Gouge
£18.00
A good 1/2 inch or 13mm No 3 sweep straight carving gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS SHEFFIELD ENG' with the Shamrock trade ...
View details
Set of 5 Small Turning Tools marked 372
£59.00
A set of five smaller wood turning chisels or parting tools.Numbered 2, 3, 4, 5 & 6.All are also marked '372' within a circular border on the blad...
View details
3 Slim MARPLES Carving Tools
£45.00
A same owner group of three narrow carving tools by MARPLES of Sheffield.1.) 1/16 inch (1.5mm) spoon carving chisel, marked 'W MARPLES & SONS CAST...
View details
5/8 inch MARPLES Bevel Edge Paring Chisel
£36.00
A very good 5/8 inch or 16mm bevel edge paring chisel by MARPLES of Sheffield.Actually slightly wider than 5/8" wide, please see close-up image.This i...
View details
MARPLES Peg Top Awl
£15.00
A very good vintage MARPLES peg top brad awl.13/8 inch (35mm) long point.Very good ash wood handle with brass ferrule and MARPLES trade mark.Much of t...
View details
3/8 inch GEORGE SHAW Mortice Chisel
£22.00
A nice antique 3/8 inch or 9mm mortice chisel by GEORGE SHAW of London.Marked 'G SHAW 297 HACKNEY RD' to one side of the blade with 'WARRANTED CAST ST...
View details
RECORD POWER Parting Tool - 3/16 inch
£25.00
A good RECORD POWER 3/16 inch or 4.5mm parting tool.Very good hardwood handle with brass ferrule and RECORD POWER trade mark.73/16 inches (183mm) from...
View details
1/8 inch MARPLES V Carving Tool
£17.00
A good MARPLES 1/8 inch or 3mm vee carving tool.Marked 'W MARPLES & SONS' to one side of the blade.A few surface spots, please see images.Very goo...
View details














