- Home
- LIE NIELSEN 140 Skew Block Plane Blade Iron
Add To Your WishlistLIE NIELSEN 140 Skew Block Plane Blade Iron
Add To Your WishlistLIE NIELSEN 140 Skew Block Plane Blade Iron
£0.00
£50.00
In stock: 1
Sorry! We're out of stock
SKU: 3166x4
Earn
0 reward points
A very little used right hand LIE NIELSEN 140 plane blade or iron.
To fit the 140 skew block plane RH.
A few minor surface spots, please see images.
11/2 inches wide, 1/8" thick, 43/4" overall length.
You may also like...
RECORD 405 Special Base - No 10 Hollow
£58.00
A very good No 10 hollow base with cutter for the RECORD 405 Multi Plane.Marked 'RECORD No10H' on the casting.Good length tungsten steel cutter, a few...
View details
New Old Stock VERITAS 05P3385 Convex Chairmakers Scraper Blade
£15.00
An unused, new old stock, 1 1/2 inch VERITAS convex chairmakers' scraper blade.In the original packaging with label.
View details
Replacement Bench Plane Handles
£21.00
A 'new old stock' pair of hardwood replacement bench plane handles.The knob is 211/16 inches (68mm) in overall height.The rear handle stands 45/16" (1...
View details
VERITAS Block Plane Blade - 1 5/8 inch
£30.00
A very little used 1 5/8 inch VERITAS plane blade or iron.To fit the VERITAS standard and low angle block planes.Made from A2 steel.13/8 inches remain...
View details
STANLEY 1 3/4 inch Plane Blades - New Old Stock - each
£16.50
An unused new old stock STANLEY 1 3/4 inch or 44mm plane blade.To fit the STANLEY No.3 bench planes.Will also fit the equivalent RECORD planes.Retains...
View details
WARD Parallel Plane Iron - 1 7/8 inch
£20.00
A good length 1 7/8 inch wide parallel blade iron by WARD & PAYNE of Sheffield.21/8 inches remaining below the slot.Approximately 3/16" (4mm+) thi...
View details
RECORD 405 Special Base Cutter - No 10 Round
£15.00
A very good near full length 3/4 inch wide cutter blade to fit the RECORD 405 Multi Plane no.10 round special base.Marked 'RECORD MADE IN ENGLAND TUNG...
View details
LIE NIELSEN 2 3/8 inch Plane Blade Iron
£60.00
A very little used 2 3/8 inch LIE NIELSEN plane blade or iron.To fit the No 41/2, 51/2, 6 and 7 bench planes.21/8 inches remain below the slot.713/16 ...
View details