- Home
- MARPLES No 7 Straight Carving Gouge - 7/16 inch
Add To Your WishlistMARPLES No 7 Straight Carving Gouge - 7/16 inch
Add To Your WishlistMARPLES No 7 Straight Carving Gouge - 7/16 inch
£0.00
£16.00
In stock: 1
Sorry! We're out of stock
SKU: 3250aa
Earn
0 reward points
A good No.7 sweep straight carving gouge by MARPLES of Sheffield.
Just over 7/16 inch or 12mm at the cutting edge.
Marked 'MARPLES & SONS SHEFFIELD' with the Shamrock trade mark to the back of the blade with '7' stamped on the top.
Some minor pitting spots to the inside of the blade, please see images.
Very good beech wood handle with brass ferrule.
No previous owner's stamps.
93/8 inches (238mm) overall length.
You may also like...
MC403 FLEXCUT No 3 x 1 inch Mallet Carving Tool
£25.00
A good 25mm or 1 inch wide MC403 No.3 mallet carving tool from FLEXCUT USA.This fixed handle tool is designed to be used by hand or with a mallet.Mark...
View details
JH SARGENT Fishtail Carving Gouge - 1/4 inch
£21.00
A very nice 1/4 inch or 7mm fishtail carving gouge by JH SARGENT.Marked 'JH SARGENT' on both sides of the blade.No sweep number but a good match to a ...
View details
HENRY TAYLOR No 2 Skew Carving Chisel - 9/16 inch
£17.00
A very good 9/16 inch or 14mm HENRY TAYLOR No.2 sweep skew carving chisel.Marked 'H TAYLOR SHEFFIELD 2' with the Acorn trade mark on the top of the bl...
View details
Unused HENRY TAYLOR No 27 Spoon Carving Gouge Blade
£16.00
An unused HENRY TAYLOR No.27 sweep spoon bent carving gouge blade.1/2 inch or 13mm wide at the cutting edge.Marked 'H TAYLOR ENGLAND 27' with the Acor...
View details
MARPLES No 8 Deep Carving Gouge - 1/4 inch
£19.00
A very good 1/4 inch or 6mm No.8 deep carving gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS CAST STEEL' with the Shamrock trade mark to t...
View details
TIRANTI Fishtail Carving Gouge - 7/32 inch
£16.00
A good 7/32 inch or 5.5mm fishtail carving gouge by J TIRANTI of London.Marked 'J TIRANTI LONDON' on the blade.Not marked with a sweep number however ...
View details
HENRY TAYLOR No 8 Straight Carving Gouge - 7/16 inch
£15.00
A good 7/16 inch (11mm) No.8 straight woodcarving gouge by HENRY TAYLOR of Sheffield.Marked 'H TAYLOR' with the Acorn trade mark to the top of the bla...
View details
3/8 inch SJ ADDIS No 3 Carving Gouge - 9mm
£17.00
A good 3/8 inch or 9mm No.3 sweep shallow carving gouge by SJ ADDIS of Sheffield.Marked '3 ENGLAND' to the top of the blade with 'SJ ADDIS CAST STEEL'...
View details