- Home
- Smiths Tools
- WHITEHOUSE KW382 Stake Horse Head Anvil - Rounded Trapzoid
Add To Your WishlistWHITEHOUSE KW382 Stake Horse Head Anvil - Rounded Trapzoid
Add To Your WishlistWHITEHOUSE KW382 Stake Horse Head Anvil - Rounded Trapzoid
£0.00
£36.00
In stock: 1
Sorry! We're out of stock
SKU: 3450f
Earn
0 reward points
A little used vintage WHITEHOUSE KW382 round trapezoid shaped horse head stake forming anvil.
Also known as a bench stake.
Marked 'KW376' to the underneath of the head.
Approximately 21/4 by 13/4 inches (57 x 45mm), a few minor surface knocks, please see images
Retains almost all of its original blue finish and WHITEHOUSE trade label.
The shank is 15/8 inches (41mm) long, 7/8" (22mm) square tapering down to 3/4" (19mm) square.
25/8 inches (67mm) overall height including the shank.
1lb 2oz or 512g in total weight.
You may also like...
Small Archimedean Drill with 5 Bits
£15.00
A small vintage Archimedean drill.Complete with 5 bits, please see images.Beechwood head stock and handle with line detail.The cap of the head stock r...
View details
WHITEHOUSE KW352 Metal Forming Stake Anvil - Ball Head
£110.00
A vintage KW 352 ball head metal forming stake or stake anvil by W WHITEHOUSE of Atlas Forge.Marked 'KW 352' to one side with 'HF' on the opposite sid...
View details
WHITEHOUSE KW351 Metal Forming Stake Anvil - Mushroom Head
£110.00
A vintage WHITEHOUSE KW 351 mushroom head metal forming stake or stake anvil.Marked 'KW 351' to one side with 'HF' to the opposite side.3 inch (75mm) ...
View details
Vintage Round Head Stake Anvil
£55.00
A vintage round head metal forming anvil stake or stake anvil.3 inch (77mm) diameter head or face, a few minor surface knocks and spots, please see im...
View details
GILBOW Tin Snips
£25.00
2 good pairs of vintage GILBOW 245 tin snips.1 each of 8 and 10 inch.Both are marked 'G245' near the joint with 'GILBOW SHEFFIELD ENGLAND' cast into t...
View details
Blacksmiths Creasing Iron Stake Anvil - Tinsmiths Creasing Stake
£125.00
A good vintage blacksmiths' creasing iron stake anvil or creasing stake.9 by 17/8 inch (227 x 48mm) working surface with 9 creasing grooves.The shank ...
View details
Blacksmiths 1/4 inch Bottom Swage
£45.00
A probably unused vintage blacksmiths' 1/4 inch bottom swage.Marked '1/4' to two sides.The head is approximately 25/16 by 21/2 inches (59 x 65mm).The ...
View details
TOGA Ball Peen Hammer
£18.00
A good vintage TOGA Brand ball pein or peen hammer by BUCK & HICKMAN.Marked 'TOGA ....MADE' on one cheek with 'SOLID (?) STEEL 1/2' to the opposit...
View details













