- Home
- JB ADDIS 7/16 inch Spoon Carving Gouge - 9 Prize Medals
Add To Your WishlistJB ADDIS 7/16 inch Spoon Carving Gouge - 9 Prize Medals
Add To Your WishlistJB ADDIS 7/16 inch Spoon Carving Gouge - 9 Prize Medals
£0.00
£18.00
In stock: 1
Sorry! We're out of stock
SKU: 2943q
Earn
0 reward points
A very tidy 7/16 inch or 11mm JB ADDIS spoon bent carving gouge.
Marked 'JB ADDIS & SONS' on one side of the blade and '9 PRIZE MEDALS 51 & 62' on the other.
A few minor surface spots, please see images.
Not marked with a sweep number however this gouge is a good match to a London Pattern No.25 sweep.
Very good boxwood handle with brass ferrule.
No previous owner's stamps.
91/4 inches (235mm) overall length.
You may also like...
MARPLES V Carving Tool - 1/4 inch No 39 Sweep
£17.00
A good 1/4 inch or 6mm 60° vee carving gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS CAST STEEL' with the Shamrock trade mark to the top ...
View details
CHARLES HILL 3/8 inch Curved Carving Gouge
£21.00
A good 3/8 inch or 9mm curved carving gouge by CHARLES HILL of Sheffield.Marked 'C HILL SHEFFIELD' with the Cannon trade mark on the top of the blade....
View details
HENRY TAYLOR 3/16 inch V Carving Gouge - No 7 Sweep
£19.00
A good 3/16 inch or 5mm 60 degree vee carving gouge by HENRY TAYLOR of Sheffield.Marked 'H TAYLOR SHEFFIELD' to the underside of the blade and stamped...
View details
MARPLES 1/8 inch No 3 Carving Gouge
£18.00
A very good 1/8 inch or 3mm No 3 carving gouge by MARPLES of Sheffield.Part marked 'W MARPLES & SONS' with the Shamrock trade mark to the undersid...
View details
PFEIL 12 Pocket Tool Roll
£30.00
A good PFEIL canvass tool or chisel roll with 12 pockets.Marked 'CONNELL YORK' on the flap, please see close-up image.Approximately 290 by 445mm (111/...
View details
Unusual Group of 5 HENRY TAYLOR Small Carving Tools
£99.00
An unusual set of 5 short or palm carving tools by HENRY TAYLOR of Sheffield.We've not seen these before.The set includes one each of the following:1....
View details
MARPLES 1/4 inch Straight Carving Gouge - No 4 Sweep
£18.00
A very good 1/4 inch or 7mm shallow carving gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS CAST STEEL' with the Shamrock trade mark to the...
View details
SJ ADDIS 5/8 inch No 45 V Carving Tool
£25.00
A good 5/8 inch or 16mm No 45 sweep 90 degree vee carving gouge by SJ ADDIS of Sheffield.Marked 'SJ ADDIS CAST STEEL' with the WARD & PAYNE trade ...
View details

















