- Home
- MILLERS FALLS 2 1/4 inch Plane Blade
Add To Your WishlistMILLERS FALLS 2 1/4 inch Plane Blade
Add To Your WishlistMILLERS FALLS 2 1/4 inch Plane Blade
£0.00
£45.00
In stock: 1
Sorry! We're out of stock
SKU: 2379dd
Earn
0 reward points
A very little used MILLERS FALLS 2 1/4 inch or 57mm plane blade.
To fit the MILLERS FALLS No.15 and 15C jack planes.
Will also fit the equivalent early RECORD and STANLEY planes that had the 21/4 inch blades.
A few surface scratches and spots.
21/16 inches (52mm) remains below the slot, 711/16 inches (191mm) overall length.
You may also like...
LIE NIELSEN 140 Skew Block Plane Blade Iron
£50.00
A very little used right hand LIE NIELSEN 140 plane blade or iron.To fit the 140 skew block plane RH.A few minor surface spots, please see images.11/2...
View details
STANLEY 289 Plane Blade Iron
£59.00
A scarce genuine American STANLEY No.289 fillister and rabbet plane blade.Produced from 1911 to 1948 and rarely seen on this side of the Atlantic.This...
View details
5 x Violin Bow Screws
£15.00
A group of 5 violin bow screws.From a retired luthier's workshop.Various lengths from 21/4 inches to 21/2" (57 - 63mm).Please see images.
View details
15 PYRAMID Superior Violin Strings - New Old Stock
£40.00
A selection of 15 new old stock violin strings by PYRAMID of Germany.From a retired luthier's workshop.Five each of Violin E-1st-Mi, Violin A-2nd-La a...
View details
WARD Parallel Plane Iron - 1 7/8 inch *SOLD*
£0.00
A good length 1 7/8 inch wide parallel blade iron by WARD & PAYNE of Sheffield.21/8 inches remaining below the slot.Approximately 3/16" (4mm+) thi...
View details
SPEEDWELL SUPER Tool Bits
£50.00
Thirteen unused 1/2 inch square SPEEDWELL SUPER tool bits by George SOUTAR & CO of Sheffield.7 of the bits are 21/2 inches in length, the other 6 ...
View details
Turbo Cut 700 Japanese Saw Blade
£39.00
An unused Turbo Cut 700mm Japanese frame saw blade.To fit the CLASSIC 700 frame saw and similar saws.Supplied by DICK of Germany.Complete in original ...
View details
2 Lathe TA5 Cranked Turning Tool Bits - SPEEDICUT MITIA
£20.00
Two TA5 lathe cranked turning tool bits from FIRTH BROWN TOOLS of Sheffield.1.) Marked 'TA5 M2144' and 'FB TOOLS SHEFFIELD MITIA', 20 by 25mm shank, 1...
View details












