- Home
- Natural Tam O Shanter Stone - Sharpening Stone - Razor Hone
Add To Your WishlistNatural Tam O Shanter Stone - Sharpening Stone - Razor Hone
Add To Your WishlistNatural Tam O Shanter Stone - Sharpening Stone - Razor Hone
£0.00
£55.00
In stock: 1
Sorry! We're out of stock
SKU: 3010bb
Earn
0 reward points
A vintage natural sharpening stone or water stone.
Believed to be a Scottish Tam O Shanter stone or Scotch hone.
This stone measures approximately 8 inches (203mm) long by 13/4" (45mm) wide by 11/16" (18mm) at its thickest part.
Smooth and flat surface with a few minor chips to the edges, please see images.
The last two images show the stone with water on its surface.
Fitted in a hardwood lidded box with markings by the previous owner.
You may also like...
SPEEDWELL SUPER Tool Bits
£50.00
Thirteen unused 1/2 inch square SPEEDWELL SUPER tool bits by George SOUTAR & CO of Sheffield.7 of the bits are 21/2 inches in length, the other 6 ...
View details
SORBY 1 1/4 inch Paring Gouge
£23.00
A tidy 1 1/4 inch or 32mm wide in-cannel paring gouge by SORBY of Sheffield.Marked 'I SORBY SHEFFIELD' with the Mr Punch trade mark on the blade.A few...
View details
ECLIPSE 413 Tool Makers Clamp
£29.00
A good ECLIPSE No 413 toolmakers clamp.5 inch (125mm) long jaws with a 31/2" (89mm) capacity.Marked '"ECLIPSE" MADE IN ENGLAND ENGLAND No413' to one j...
View details
No 3 Small Strapped Claw Hammer
£25.00
A vintage or antique Kent pattern strapped claw hammer.Octagonal neck, fulcrum to the top of the head.Stamped '3' on one cheek.15/16 inch (23mm) diame...
View details
HENRY TAYLOR 1 1/2 inch Bevel Edge Paring Chisel
£49.00
A scarce early HENRY TAYLOR long thin bevel edge paring chisel.Better known for their carving and turning tools, we see very few other early edge tool...
View details
GROZ Wheel Dresser - WD/01
£15.00
A little used GROZ WD 01 grinding wheel wheel dresser.Retains the majority of its original black finish throughout.101/2 inches overall length.In its ...
View details
MARPLES R357 Extension Shank
£18.00
A very little used MARPLES flat bit extension shank.For use with R355 and RM325 flat bits.The head will pass through holes that are inch (16mm) or gr...
View details
Small Archimedean Drill with 5 Bits
£15.00
A small vintage Archimedean drill.Complete with 5 bits, please see images.Beechwood head stock and handle with line detail.The cap of the head stock r...
View details

















