- Home
- WHITEHOUSE Stake Horse Head Anvil - Saddle
Add To Your WishlistWHITEHOUSE Stake Horse Head Anvil - Saddle
Add To Your WishlistWHITEHOUSE Stake Horse Head Anvil - Saddle
£0.00
£42.00
In stock: 1
Sorry! We're out of stock
SKU: 3450g
Earn
0 reward points
A little used vintage WHITEHOUSE saddle shaped horse head stake forming anvil.
Approximately 29/16 by 17/8 inches (65 x 48mm), a few very minor surface knocks, please see images
Retains almost all of its original blue finish.
The shank is 15/8 inches (41mm) long, 7/8" (22mm) square tapering down to 3/4" (19mm) square.
31/8 inches (80mm) overall height including the shank.
1lb 143/8oz or 868g in total weight.
You may also like...
Blacksmiths 3/8 inch Bottom Swage
£45.00
A probably unused vintage blacksmiths' 3/8 inch bottom swage.Marked '3/8' to one side.The head is approximately 25/16 by 21/2 inches (59 x 65mm).The s...
View details
Blacksmiths Hatchet Stake
£95.00
A good vintage blacksmiths' or tinmens' hatchet stake.10 inch (253mm) long by 11/16" (21mm) thick angled edge.The shank is 10" (253mm) long and 11/4" ...
View details
PRIORY Tools Display Stand
£45.00
A scarce vintage PRIORY Tools wooden display stand.PRIORY brand tools have been produced by SMITH FRANCIS TOOLS of Birmingham since 1934.This wooden d...
View details
Vintage Tinsmiths Funnel Stake Anvil
£110.00
A good tinmens' or tinsmiths' funnel stake or forming anvil.The cone shaped head is 37/8 inches (99mm) at its widest point and 71/2" (190mm) in length...
View details
Blacksmiths 1/2 inch Bottom Swage - by WHITEHOUSE ?
£45.00
A probably unused vintage blacksmiths' 1/2 inch bottom swage.Believed to be by WHITEHOUSE of Atlas Forge.Marked '1/2' to one side.The head is approxim...
View details
WHITEHOUSE Tinmens' Horse
£95.00
A good vintage tinsmiths' or tinmans' horse by WHITEHOUSE of Atlas Forge.The 1 inch (25mm) square section right angle horse has 11" (280mm) long arms ...
View details
Blacksmiths Hardy Cropper - Hot Cut Tool
£35.00
A very little used vintage blacksmiths' hardy cropper or hot cut tool.13/4 inch or 45mm wide.The shank is 2" (51mm) long and 11/8" (30mm) square taper...
View details
GILBOW Tin Snips
£25.00
2 good pairs of vintage GILBOW 245 tin snips.1 each of 8 and 10 inch.Both are marked 'G245' near the joint with 'GILBOW SHEFFIELD ENGLAND' cast into t...
View details
















