A scarce early VERITAS sharpening system by LEE VALLEY TOOLS of Canada.The system is made up of a precision honing guide and an angle jig set.Marked '...

A very good antique MARPLES 1 1/2 inch or 38mm paring chisel.Marked 'HIBERNIA W MARPLES & SONS CAST STEEL' with the Shamrock trade mark to the top...

A good 1 inch or 26mm in-cannel paring gouge by MARPLES of Sheffield.Marked 'W MARPLES & SONS SHEFFIELD ENGLAND' with the Shamrock trade mark to t...

A very little used MARPLES 1/4 inch or 6mm cranked paring gouge.Excellent boxwood handle with brass ferrule, MARPLES trade mark and almost all of its ...

An unused MARPLES 1/4 inch (6.5mm) mortice chisel.Also known as a sash mortice chisel.Marked 'W MARPLES & SONS SHEFFIELD ENGLAND' with the Shamroc...

A good 15/16 inch or 23mm MARPLES in-cannel paring gouge.Marked 'W MARPLES & SONS SHEFFIELD ENGLAND' with the Shamrock trade mark to the top of th...

A little used 3/16 inch firmer chisel by MARPLES of Sheffield.Faintly marked 'W MARPLES & SONS SHEFFIELD ENGLAND' with the Shamrock trade mark to ...

A good 3/8 inch or 10mm out-cannel paring gouge by MARPLES of Sheffield.Excellent boxwood handle with brass ferrule and the MARPLES trade mark.No prev...

A little used 5/8 inch or 16mm registered mortice chisel by MARPLES of Sheffield.Marked 'MARPLES MADE IN ENGLAND' with the size in imperial and metric...

A good 7/16 inch or 11mm MARPLES in-cannel paring gouge.Round neck version, a few minor surface spots to the blade, please see images.Good boxwood han...

A scarce antique long shallow cranked cranked paring chisel by MOULSON BROTHERS of Sheffield.Just over 3/4 inch or 20mm wide.Marked 'MOULSON BROTHERS ...

A vintage natural sharpening stone or water stone.Believed to be a Scottish Tam O Shanter stone or Scotch hone.This stone measures approximately 8 inc...

A good 1/2 inch or 12mm parting tool by NOOITGEDAGT of Holland.Sharpened by the previous owner, please see close-up images.Very good hardwood handle w...

A little used NORTON Pike brand India combination oil stone or sharpening stone.8 by 2 by 1 inches (204 x 51 x 25mm) overall.Faintly marked 'FINE' to ...

A good PFEIL canvass tool or chisel roll with 12 pockets.Marked 'CONNELL YORK' on the flap, please see close-up image.Approximately 290 by 445mm (111/...

A good RECORD POWER 3/16 inch or 4.5mm parting tool.Very good hardwood handle with brass ferrule and RECORD POWER trade mark.73/16 inches (183mm) from...

A probably unused ROBERT SORBY 1/2 inch or 13mm in-cannel firmer gouge with registered pattern handle.Marked 'ROBERT SORBY SHEFFIELD ENGLAND' to the i...

A little used ROBERT SORBY 1/2 inch or 12mm 331 sash mortice chisel.Marked 'ROBERT SORBY SHEFFIELD ENGLAND' to the top of the blade.Excellent boxwood ...

A very little used, probably unused ROBERT SORBY traditional bevel edge chisel.Described as a 500 C.A.B. handled chisel in the catalogue.Marked 'ROBER...

A good graduated set of three firmer chisels by COLONEL of Sheffield.Sizes: 1/4 (6mm), 1/2 (13mm) and 1 inch (24mm).Each is marked '"COLONEL" SHEFFIEL...

A set of five smaller wood turning chisels or parting tools.Numbered 2, 3, 4, 5 & 6.All are also marked '372' within a circular border on the blad...

A good triangle shear scraper by SJ & JB ADDIS of Sheffield.9/16 inch (15mm) triangular steel.Very good ash wood handle with brass ferrule and tra...

A tidy 1 1/4 inch or 32mm wide in-cannel paring gouge by SORBY of Sheffield.Marked 'I SORBY SHEFFIELD' with the Mr Punch trade mark on the blade.A few...